87 replies to this topic

[remzibi]

....I wan to build 01 set for my hobby, but might you explain some part like L1P,L2V and L3A ( ? uHenrry), ...

This parts are inductances - all can be 4,7 to 10uH - goot to add some inductances at both ENG input - also for all ADC inputs - this will help to cut noises from/to RC circuit .
If you need naked PCB , write me at PM or at remzibi1-AT-poczta.onet.pl

[Doofer]

Hi Remzibi - PMOSD worked OK over the summer, apart from I put the altitude number too close to the symbol, so it kept counting up to 99 then starting again!

Is there a simple way to blank the OSD display? I know you're not keen on providing an interface to the R/C receiver, but I really would prefer to be able to remove the OSD from the video when I'm just flying around enjoying the view.

Doofer

[remzibi]

....Is there a simple way to blank the OSD display? I know you're not keen on providing an interface to the R/C receiver, but I really would prefer to be able to remove the OSD from the video when I'm just flying around enjoying the view.

Doofer

I had some questions about - i will consider T1 input (new board design) for this purpose coneccted to any free RC channel , however all depends from freee space in chip .
For now this 16K small chip holding suprisly lot of informations , countings and functions but one timer is still free .

[remzibi]

Some off topic - but here are the wishes for all of you

http://niespodzianka.info/goj

Merry Christmas

[Doofer]

Hi Remzibi. Still loving the PMOSD, currently sitting on a quadrocopter.

The quad loses full control in winds over ~20 kph = slides into the ground sideways.

As a consequence, it would be GREAT to be able to set an alarm when ground speed exceeds 20kph (OK, it would be ideal to have an alarm when flightspeed > 20kph, but let's keep it simple). I note that alarms are only available on certain indicators - is there an update which makes them available for all indicators?

[Doofer]

Oh, and another request - can we set a default where the OSD has a "No GPS lock" indicator, which changes to 'GPS lock' followed by zeroing the position. It is driving me NUTS to have to return to my model after switch-on to zero everything once the GPS has achieved lock...

... but PMOSD is still great....

[Terry]

My one dose auto zero, you just tell it how many sats it needs before it dose it.

Terry

[Doofer]

My one dose auto zero, you just tell it how many sats it needs before it dose it.

Terry

Ah, thanks for the prompt! I'd assumed that was just an un-implemented feature - mine was set to the same... once it'd found 8 satellites, which around here, at ground level, it never does. Too many houses in the way. Re-set to 5 sats, and it auto-zeros nicely!