Vid tx will not transmit
Posted 18 May 2011 - 07:50 PM
Posted 19 May 2011 - 07:17 AM
You would normally see a blank screen or a least so a change in the snow as the TX is switched on and off, but....
Would the tx transmit a sig to the rx and show up on the display as anything if the cam was disconnected?
if your screen dose not show snow and gives a blue screen or simular then you will need a camera connected.
My display just says no signal as if the fpv gear wasnít even turned on
I take it you dont have access to other gear to help you test?
Posted 19 May 2011 - 07:32 AM