Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.


  • Content Count

  • Joined

  • Last visited

Community Reputation

2 Neutral

About Nevertoooldfortoys

  • Rank
    RC-Cam Visitor
  1. On further testing (20 min constant transmission), no tearing or image distortion was noted after the mod. Hooked up a 30db attenuator to simulate long range and image stays stable right up to "snow distance". A 470uF Cap does fit in the casing, but extension leads are needed to solder it in. So happy this has been resolved. Thanks Sulya and Mr.RC-cam.
  2. Did mod. Removed resistor, transistor and added capacitor. Early signs promising. No tearing of image or rolling of picture. Fingers crossed that it will stay that way. Plane in pieces at the moment so will be a while before I can do a proper test.
  3. Points 1-4 noted. 99% it's not 4 (wrong frequency). Initially I thought is was a problem with with quanum goggles as well, but after viewing the exact same issue when the fr632 is plugged into a 40inch HD tv, I have to give it the benefit of the doubt. My very homemade rx5808 reciever works perfectly with the quanums as well, I think I must have a dud fr632. If the tx5826 should play with the fr632 think it must be a QC issue somewhere. I have a spare tx5826 which I might connect to see if that fixes the problem --- long shot, and then cut my losses. Will use fr632 for tracking and use di
  4. This has been driving me nuts for months. Current set up is: rmrc moniter Boscam tx5826 module diy tx skylark tiny osd sony super had camera Boscam fr632 quanum v2 pro goggles. image on rmrc moniter has been ok, with the picture sometimes yellowing. Flyable image on quanum has intermittent rolling/tearing of picture, so I assumed there was something wrong with the goggles. Checked signal on Samsung TV and I get the same tearing of picture. So not a monitor issue. Finally found my way here and read about possible incompatibility of 32 band and 7
  • Create New...