Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.



Ricnolt

Members+
  • Content Count

    14
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Ricnolt

  • Rank
    RC-Cam Visitor

Contact Methods

  • MSN
    eric.lecomte@laposte.net
  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    France
  1. I have not chance. Now, I have more than 5 V to power the OSD ???? I have 0,15 V
  2. Not obvious to make welds as small but it is good that it works
  3. Hello, The problem has been solved, it was the weld of the resistor 10K to be rebuilt. Now everything work !!!!! Thank a lot and good flight
  4. I am unable to send mail to the address: thomas[AT]webx.dot.dk Here are the pictures of the current sensor
  5. Current Zero = 197 Current Gain = 35 I work now, finally I try ^^
  6. No, i didn't change setting, just returned connector. But he doesn't change value, he stay at 3,00 AMP. I put a motor for consumming current and he doesn't change the value, fix at 3,00 AMP.
  7. I progress, I returned the connector, and now i have 3,00 Amp fix. The connection is Orange-black-red instaed of red-black-orange.
  8. Ok, please if you can put picture of yourcurrent sensor calibration ?
  9. I tried reversing the pins +5 V and ground but it is identical, it's still at 0. Should we set up something in the windows program ?
  10. ok, I will try and i will tell you if it's ok or not. and thank for your rapid answers
  11. Arf, I must have some length with my setup. And I ask me if the current and consommation are not linked with the counter that remains to 0 on the video "00:00M" ???
  12. Yes i known, but it's indicate to the spécification of current sensor Current sensor ???
  13. Hello, Sorry for my bad english I bought the OSD module and I have a small problem. The current remains to 0.00 A and consommation to 0 mAh. Do you have any idea ? ? Here is my setup And here a video Video Thank and have a nice day
×
×
  • Create New...