Attention: RC-CAM.com will be closing down August 2021.The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.
We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.
RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.
We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.
thanks. Okay, i will stay with the Sky-RF modules. They are not getting that hot and cheap too. Normally i fly 10mW 2,4GHz and it works really good. 1600m with 11dbi diversity patch with good video. 16dbi & 18dbi Yagi is already in the house.
I had the same problem with the AWM633 2,4GHZ 450mW module with a Recom 3,3V switching reg. to close to the module => lines in the video I needed a LC-Filter too, because of the noise of the regulator. I don't know if i should buy this Airwave 450mW 5,8GHz module, because i have the Sky-RF 200mW 5,8GHz Sets and they work very good, even with the 3dbi whips. I have done the review here: http://fpv-community.com/testblog/2010/bevrc-5g8-200mw-fpv/ Would be nice if someone could compare these both systems, so i don't have to buy another module.
BlueAngel replied to Wavess's topic in R/C Wireless Video: General Info, RF Gear, and CamerasHi, i want to do the same TX with the AWM630-TX 10mW Module. In a german forum, they told me that i have to use something like a "Pre-Emphasis" for the video signal. But on the picture from wavess i don't see anything like that. The video output from the cam is directly connected to the video input from the tx module or not? thx Blue