Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral


  • Rank
  • Birthday 04/29/1949

Profile Information

  • Location
  • Interests

Contact Methods

  • Yahoo
  • Skype
  1. I do the best I can to help on the published projects but I can't solve every problem. For sure, I would be interested in knowing what you mean by that. Do you have a link to the first discussion where I provided the poor help?
  2. Very, very, good for your reply, sorry that did not help me at all. If it were just rest your eyes and the problem would resolve itself would not be bothering you with this type of question. Anyway thank you for your response and your help in vain! It's the second time I make an appointment and you do not get any positive feedback, help me here man! MNicolini
  3. Friend, assembled the project NAV LIGHTS literally according to the layout and components made ​​by you. But I'm having a little problem and would like your help. When I turn the switch on / off, the navigation lights illuminate normally but the strobe light, between a flash and another, is not completely clears and the headlights are flashing like strobe but with much reduced intensity. What can be and what to do? Tale usual your help MNicolini
  4. Hi Mr. RC-Cam, Since you also bought a 808 a spy camera, was being provience the inclusion of this tutorial remote swich camera in CamMan? Thanks, MAFONI
  5. Hi Nigel, I already sent several statements to Danny, but so far nothing no response. I will continue waiting for his return to see if it sends the remote switch to Brazil-Rio de Janeiro. Thanks, MAFONI
  6. Dear Nigel, Thank you for the information. I had already had read almost all topics on the Internet, on camera spy 808, but none referencing the ship's programming PIC's. As projects of RC-Cam programming, and are based on this as I already have the programmer for them, I am asking the help of Mr. RC-Cam for that. Anyway, if you can not help it, I'll get in touch with Danny to see what they do, since I am in Brazil - Rio de Janeiro and not know if you can send this type of product to and fro. Thanks, MAFONI
  7. Dear Mr. RC-Cam, here are the answers to your questions: Q¹ - What logic level (active low or active high) is needed on the switch to take a photo? A - Active low. Q² What is the required press duration? A - To power the camera = 4~5.0 m/s, to take a photo = 1.0~1.2 m/s, to get video = 1.4~1.6 m/s, to complete a video = 1.0~1.2 m/s and to turn off the camera = 4.0~5 m/s. Q³ - What is the camera's operating voltage (not the battery voltage, but the circuit's voltage)? A - 3,3V. In anticipation of good news Hugs, MAFONI Adding the above response: The sequence of activati
  8. Mr RC-Cam, I would like your help in regard to inform me which of the projects CamMan could be used to drive through the transmitter (Tx), a 808 car keys - Micro Camera - Spy (photos below) and show if there is any change to be made. Since already many thanks for your feedback. MAFONI
  9. Friends, the error is still occurring and the start of the recording is on file. Hex. The writer complains that it says 0x0025 at address 0x000000 but he is reading 0x0FFF. I use a serial programmer PICBURNER could help me configure it to solve this problem? Thanks, MNIcolini OBS.: The hex file that is giving this problem is http://www.rc-cam.com/bitsw.htm.
  10. Dear, in view of the difficulty in getting a tape recorder to record this .Hex, I ask your help in informing me a model of recorder that surely burn this file. In anticipation of an early return, Sincerely, M Nicolini
  11. Thank you for your reply, it helped me a lot. MAFONI
  12. Friends, I need your help. When I try to burn a PIC 10F206 PicBurner a recorder, the message below. Help me please. Greetings, Marcelo - Brazil. http://img153.imageshack.us/img153/6606/errod.jpg
  13. Not always the solutions are complex as we think, is simple things well. Marcelo.
  14. Eureka! Worked. 1) Just connecting the battery to the circuit, strobe lights shining straight. 2) Jump to pin 4 and pin 5 with a 560R resistor, strobe flashes 1X. 3) With a brief short circuit between pins 1 and 4 flashing strobe is 2X. No receiver (Rx) and no radio (Tx). What a beauty! Thank you all for your help. Best regards Marcelo
  15. Great and how do I get 2x strobe flash? Marcelo
  • Create New...