Jump to content
Vrflyer

Modification to my (old) I-Glasses headset

Recommended Posts

My last modification was to integrated the RC-tech gyroscope from Kilrah to my headset and use the Radio battery to power the headset, receiver, gyro.

post-8-1167190449_thumb.jpg

Share this post


Link to post
Share on other sites

Everything work fine, but I decided to remove the RC-tech gyroscope and install the Aeropix gyro. Aeropix gyro is the same size as my receiver, so on one side I have the receiver, and on the other I will have Aeropix gyro. I want also to change my headset with something smaller and lighter, the RC-tech gyro is smaller and it will fit nicely with my new headset.

post-8-1167190969_thumb.jpg

Share this post


Link to post
Share on other sites

Front view.

My headset has suffered a lot from years of experimentation... :)

The receiver was integrated in the headset by me, and removed last years after I discovered a receiver must be inside metallic case to improve reception, so I made metallic case and installed the receiver on the side, and it was better. My receiver is still not perfect, Anthony's receiver surpasses mine, but it’s bigger and too heavy for my headset. I have an idea for my new headset, I will discuss another day about it.

post-8-1167192018_thumb.jpg

Share this post


Link to post
Share on other sites
My last modification was to integrated the RC-tech gyroscope from Kilrah to my headset and use the Radio battery to power the headset, receiver, gyro.

Hello Denis,

Is it the i-glasses SVGA 3D?

Besides the difference on sizes, what else is different between the two Gyros?

I got my gyro from Anthony, but I don't have the Kilrah's to compare.

Are you using a router type high gain antenna, 2.4-2.5 ghz?

Sorry if I have been asking too much :rolleyes:

Merci.

Edited by wilson

Share this post


Link to post
Share on other sites
,

Is it the i-glasses SVGA 3D?

No 3D video input only, no SVGA

Besides the difference on sizes, what else is different between the two Gyros?

No differences, only the price :)

Are you using a router type high gain antenna, 2.4-2.5 ghz?

No standard 3dbi whip antenna and airwaves receiver in a metalic cas3.

,

Is it the i-glasses SVGA 3D?

No 3D video input only, no SVGA

Besides the difference on sizes, what else is different between the two Gyros?

No differences, only the price :)

Are you using a router type high gain antenna, 2.4-2.5 ghz?

No standard 3dbi whip antenna and airwaves receiver in a metalic cas3.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×