Jump to content
Sign in to follow this  
gjestico

GPS + baro altitude

Recommended Posts

What would be involved in taking the GPS data from a module and adding the data from a digital baro altitude sensor, then sending the info over a wireless digital RF link ?

Basically whats a reccomended starting point. I have a freind whos an electronics whiz but he has never done anything like this before. We just need to be pointed in the right direction. We have the RF link and the digital altitude sensor. Just need the GPS module and the micro to integrate the data.

Thanks

Greg

Share this post


Link to post
Share on other sites

What I'd do is feed the GPS NMEA data into the microcontroller's serial port (lots of info about the data format on the net, just do a quick search), and replace the altitude field with the data obtained from the barometric sensor before sending the result through the RF link.. That would work transparently and allow using any GPS software on the other end.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...