Jump to content
Sign in to follow this  
Simon L Nelson

LMA new program?

Recommended Posts

What is the posibility that some one or the RC Cam guy can redo the PIC program to suit the Multiplex radio for the Lost Model Alarm?

This is such a neat system, we must be able :) to work with Multiplex?

You can email off line if you wish



Simon Nelson

Share this post

Link to post
Share on other sites


Hi, Simon

You need a new design just because the Multiplex plug ( if not UNI ...) isn't wired as shown ... :rolleyes:

Low frame sets are all in museums today ...

really do not understand what you mean ... and what you look for.


Edited by Acetronics

Share this post

Link to post
Share on other sites

Did you try the special hex file I posted in your original thread?

FWIW, from what you posted in that thread, there appears to be a problem that is unrelated to the frame-rate issue. That is because you should hear three beeps when power is first applied. But you mentioned yours does not make any sound at any time. That means something is wrong with construction.

It is possible that the existing design will work once you correct the problem. If you hear the three beeps at boot, but it still does not recognize the MPX Tx, then try turning off unused servo channels on the Tx. If that does not help, then use the special hex file I posted.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...