Jump to content
Sign in to follow this  
coskun

Video distortion

Recommended Posts

Have you tried viewing on another monitor, and connecting the camera directly to the display you used for that capture (without wireless stuff)?

Ususally that sort of tearing comes from bad video level setting on the TX/RX, but here the image being nice (no white saturation etc) I would rather aim for something on the camera or monitor.

Share this post


Link to post
Share on other sites

Which devices are involved?

Just Camera and Monitor?

Or is there some TX/RX, VCR,... involved?

Share this post


Link to post
Share on other sites

That looks like something affecting the H-Sync stability - what kind of power supply are you using on both the TX and RX end? You may want to try stabilizing that, making sure it's not underpowered.

Daniel

Share this post


Link to post
Share on other sites

this is a typical result of:

too little value capacitors in series with the video line,

some use 100uF but 470uF will perform much better.

you can also see this problem if the powersupply if bad,

simply add 1000uF to all items + and - lines one at a time

to isolate and see what happens.

also take a voltmeter and check all is within spec

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...