Jump to content
Sign in to follow this  
Rodney

Lost Plane device for FASST

Recommended Posts

On my Futaba FASST system, if you crash in heavy forest or brush the signal out of the receiver continues to look good after you turn the transmitter off (keeps outputting last known good signal to servo) so a pulse ommision type triggered fail safe continues to think it is getting a good signal and will not activate. If it is self powered and you lose the battery connection to the receiver, it will respond but; sometimes the receiver continues to receive power after the crash. Any ideas to cover such unfortunate event should the receiver remain powered up? /Thanks, Rodney

Share this post


Link to post
Share on other sites

Does the FASST Rx have programmable failsafe? If so, LoMA should work if you program a spare servo output to >2.05mS.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...