Jump to content
Sign in to follow this  
Blufires

Camman-xp + bitswitch?

Recommended Posts

hi, i'm new here. i have parkzone slo-v, and i was wondering if the bitswitch project can be controlled by the camman-xp project to provide a servo interface on/off. alternatively, can the on/off on the camman-xp pic controller do this with a servo? thanks

P.S. I'd like to control the servo to go full way from 1 end of axis to the other, so full down, and full up toggled by the x-port button.

Share this post


Link to post
Share on other sites

From what you have described, I don't think you need the BitSwitch. CamMan-XP will control a servo directly, and it has a on/off output that is similar to the Bit-Switch device.

Share this post


Link to post
Share on other sites

Sorry, I misunderstood. Upon XPort command, the servo performs a press and release action. It does not hold the servo in position for the duration of the press. There are other XPort projects out there. So, try searching around for something that will do what you need.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...