Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.



FPV Easystar ready to fly with onboard video equipment


Recommended Posts

Selling one of my FPV planes!

Multiplex EasyStar FPV plane with ailerons

E-Flite Series 6 2700 KV motor and prop

Castle Creations 25 amp ESC

Berg 7 channel receiver ch14

4.8 volt 1500mah rx battery

(5) Hitec HS 81 MG servos

KX 131 ccd color video camera on pan servo

500mw 2.4 ghz video transmitter with antenna

Video equipment wire-harness

Voltage regulator for video equipment(5V)

Custom on-off switch for video equipment

(1)2 cell lipo for 5v video equipment

(1)2cell lipo for motor power

Was $400.00 + shipping

Now $350.00 + shipping

Bank or Postal money order

Reason for sale is converting FPV plane funds into APV Quadrocopter.

mcrotor

post-2719-1208607269_thumb.jpg

post-2719-1208607358_thumb.jpg

Link to post
Share on other sites
  • 3 weeks later...
  • 4 months later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...