Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.

Recommended Posts

It all depends. Are you talking about a small change in freq (<5%) or a much greater shift? Can you be more specific (i.e., current freq vs. required freq, equipment involved, Tx/Rx design details)?

If you are talking about shifting a R/C system from one channel to another, in the same RF band, then it can be as simple as a xtal change and re-tweak. If you are talking about taking a typical looking sardine can type 1.2Ghz wireless video system and moving it to 900Mhz or 2.4Ghz, then the impact would be so enormous that most mortals would be doomed to fail.

Link to post
Share on other sites
  • 1 month later...

Im Guessing you may be interested in buying a set from elsewhere in the world?

OR a roving RCer worldwide?


The Xtal picks the freq within the band.

The set is tuned throughout the superhet stages to the band.

Futaba and I think JR at least do sell TXs which have removable (interchangeable) Freq Modules so International competitors only needed a new Module and RX rather than whole outfit.

BUT you still have to buy a Rx per Freq Band ie 72Mhz USA, 35Mhz UK 72Mhz Australia for Air etc etc and Xtals

If my assumption is correct; it proves almost as expensive to buy a module+ Rx + Xtals locally (+ the TX from elswhere ie ebay) as it would to buy a whole set locally.

If your a travelling RCer most recent models brands sell freq modules + Rx + Xtals so you can still use your familiar TX and setup anywhere in the world.

Good thing we learnt from valves and standardised world wide isnt it?? :blink::rolleyes:

Edited by Flyoz
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...