Jump to content

Recommended Posts

I recently installed a 10mw transmitter and CMOS micro camera on a rubber-band powered plane of mine (the system ended up being a little heavy which, for now, is beside the point) and I am encountering some difficulty with the stability of the video. For some reason, I can't seem to get a static/interference free image for more than a second or two at a time.

I have attached a jpeg which shows the layout of the system (incidentally the plane ended up being extremely tail heavy). The battery I used is 3.7 volt Li-ion with around 200 mah current. The battery is powering both the transmitter and the camera simultaneously. Could this be the culprit?

Also, a video sample can be viewed at: http://www.williamwhited.com/FPVhelp.html

I thank you so much for your time and willingness to help!

William Whited

click here to email me


Link to post
Share on other sites

The video looks normal to me. You will always get breaks in the picture when walking about indoors.

Are you sure it's powered by 1 3.7v cell ? seems a bit low to me. Some transmitters are 3.3v but I don't know of any 3.3v cameras.


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...