hsj99 0 Report post Posted June 17, 2008 Would it be possible to add a digital display to your Servo Tester. BTW, it works really well and thanks for the project. Thanks, Howard W8HSJ Quote Share this post Link to post Share on other sites
Mr.RC-Cam 124 Report post Posted June 17, 2008 When developing the RCST I considered sending the R/C data out the spare pin (via RS-232) for use with a SEETRON LCD panel. But my goal was to keep the project simple and cheap, so that idea was abandoned. I don't have any links, but I recall seeing published servo emulator projects that included a display. So, you could look around for something to build. Thanks for the kind words and feedback. Quote Share this post Link to post Share on other sites
Terry 5 Report post Posted June 17, 2008 I made one from EPE magazine years ago, I expect you can get the info from their web site if you want it. Terry Quote Share this post Link to post Share on other sites
delokaver 0 Report post Posted March 30, 2013 hi Mr Cam. is it possible to use the PIC 12f629 instead of 12Cxx series ? if so would you share the hex files for use in PIC 12f629 ? Any help will be really apriciate. or you can email it to me to delokaver@yahoo.com (if you dont mind) thanks Quote Share this post Link to post Share on other sites
Mr.RC-Cam 124 Report post Posted March 30, 2013 The PIC12F629 is not supported. You can use the PIC12F508 or PIC12F509 Quote Share this post Link to post Share on other sites
