Jump to content
Sign in to follow this  
Marc22

Strobe LandTastic

Recommended Posts

Hello with you all,

Minor problems to be solved. I assembled the landtastic with a 12f675 in version deluxe. The operation of the servo idle is perfect, on the other hand fires of strobe pose a problem to me.

With the startup of the X-ray they work at the end of 3-4 seconds. If I do not put the TX in action it keeps operating, but if I bring the TX into service and without anything to touch it die out and is not re-ignited.

Would you have a solution?

Forgiven my English who is not as well as possible of his form, for me which am French it is not always easy.

I wish you a good day.

Marc22

Share this post


Link to post
Share on other sites

Upon boot, if the R/C pulse is missing you will see a slow single blink strobe. This is a warning feature. Your report confirms this is working fine.

When valid R/C pulses are first applied, the strobe turns off. It remains off until you arm Landtastic. Arming requires servo pulses less than 1.25ms, then pulses greater than 1.75mS. Once armed, the double wink strobe will appear. Your report says you do not see the double wink, so that means you have not armed the Landtastic.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×