AntonioMontero 0 Posted November 19, 2009 Report Share Posted November 19, 2009 Hi all, I have started to work on a project that involves interfacing a GPS receiver with the laptop and then FPGA. Can some one please refer me a model no. for the receiver. thanks Quote Link to post Share on other sites
pseddon 2 Posted November 20, 2009 Report Share Posted November 20, 2009 There are many different ones see http://www.sparkfun.com/commerce/categories.php?c=4 Some require 3.3v supply and others 5v supply. The update rate is also a parameter that will be important depending on what you are designing. Some have a binary mode that offers greater flexibility than the standard NMEA messages, as well as different interfaces (serial, usb etc). Peter Hi all, I have started to work on a project that involves interfacing a GPS receiver with the laptop and then FPGA. Can some one please refer me a model no. for the receiver. thanks Quote Link to post Share on other sites
AntonioMontero 0 Posted November 21, 2009 Author Report Share Posted November 21, 2009 There are many different ones see http://www.sparkfun.com/commerce/categories.php?c=4 Some require 3.3v supply and others 5v supply. The update rate is also a parameter that will be important depending on what you are designing. Some have a binary mode that offers greater flexibility than the standard NMEA messages, as well as different interfaces (serial, usb etc). Peter Thanks for the advice, I have ordered GLOBALSAT BU353 SIRFSTAR III USB GPS RECEIVER, hopefully I would be able to interface it via the serial USB2.0 port. thanks again Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.