bisenberger 0 Posted January 7, 2010 Report Share Posted January 7, 2010 Hi, I'm new to this forum. Lots of great information here. Here's a description of my project, any guidance or recommendations would be greatly appreciated: I would like to add video down link to my KAP (Kite Aerial Photography) rig. It's the BROOXES BASIC KAP KIT (BBKK) on this web page and a Spektrum DX5e RC radio. I have two digital cameras that I use for KAP. They both have video output, but the jacks are different for both. One is a Canon PowerShot A590 IS the other is a Ricoh GX200. I would like to be able to see what the camera sees and when it takes the picture. Also, what would be a good portable option for viewing the transmitted signal outside? Thanks, Bill Quote Link to post Share on other sites
Terry 5 Posted January 8, 2010 Report Share Posted January 8, 2010 Hi Bill, there is a huge choice availible now so it's down to you. I would surgest a 10mW to 100mW 2.4Ghz video system and a 7" LCD screen or video glasses. Terry Quote Link to post Share on other sites
bisenberger 0 Posted January 8, 2010 Author Report Share Posted January 8, 2010 Thanks Terry, Would the 2.4Ghz system interfere with the 2.4Ghz Spektrum RC? Quote Link to post Share on other sites
Terry 5 Posted January 8, 2010 Report Share Posted January 8, 2010 (edited) err yes, maybe go for 5.8Ghz or 900Mhz video then. Terry Edited January 8, 2010 by Terry Quote Link to post Share on other sites
bisenberger 0 Posted January 11, 2010 Author Report Share Posted January 11, 2010 Found what I needed at New Generation Hobbies. They have some excellent Almost Ready to fly video systems. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.