wavejet 0 Posted July 6, 2010 Report Share Posted July 6, 2010 Hello I have made a CamMan-XP and it looks like it is working ok The problem I am having is that when the Xport button is pressed all control of plane is lost and the alert led comes on as if the transmitter has been turned off If I press the Xport button quite quickly a number of times the CamMan-XP will operate the servo most times could the Xport in the plane be damaged? or could it be the transmitter? Link to the plane http://www.the436modelshop.co.nz/item_detail.asp?id=5070&category=142 Link to what looks like my transmitter http://www.hobbyzonesports.com/Products/Default.aspx?ProdID=HBZ7072 kind regards Andrew Quote Link to post Share on other sites
Mr.RC-Cam 129 Posted July 6, 2010 Report Share Posted July 6, 2010 That is correct, when the XPort button is pressed the normal R/C control is temporarily disabled. So, only press it when you need to. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.