vespa 0 Posted August 13, 2010 Report Share Posted August 13, 2010 What would be involved in: - Powering the LoMa with 7V LiFe - Triggering the alarm at something like <=6.3V (in addition to PWM) - Implementing some sort of hysteresis to the voltage trigger (not essential) TIA! Quote Link to post Share on other sites
Mr.RC-Cam 129 Posted August 13, 2010 Report Share Posted August 13, 2010 - Powering the LoMa with 7V LiFe Just use a LDO VReg IC to provide 5V to the LoMA and its microcontroller. - Triggering the alarm at something like <=6.3V (in addition to PWM) - Implementing some sort of hysteresis to the voltage trigger (not essential) This part will be up to you since I don't have any tips to offer. Quote Link to post Share on other sites
vespa 0 Posted August 16, 2010 Author Report Share Posted August 16, 2010 Thanks RC-Cam. Is the source code for this available that I could use as a starting point? Quote Link to post Share on other sites
Mr.RC-Cam 129 Posted August 16, 2010 Report Share Posted August 16, 2010 Sorry, source code is not available. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.