Jump to content

Attention: RC-CAM.com will be closing down August 2021.

The RC-Cam.com forum was the very first online community dedicated to the advancement of wireless video cameras on radio controlled (R/C) models. This is now called "FPV" (First Person View). We are proud of the contributions that our members have made to the FPV hobby.

We've seen significant changes over the last twenty years. Initially there were a lot of eager R/C hobbyist that built their own video systems. Allowing these creative individuals to share their work was the purpose of this site. Now the FPV market is flooded with low cost systems; Sadly DiY FPV video projects are now rarely discussed.

RC-CAM.com (main site and forum) will be closing down August 2021. This is being announced now (March 2021) so that everyone has time to download any information that is important to them. After the site is shutdown the information will no longer be available here.

We appreciate every member's involvement with advancing the FPV hobby. It is indeed sad to say goodbye to all our online friends. Be safe and stay healthy.

5.8GHz 10mW A/V RF modules, 8-channel

Recommended Posts

SOLD OUT, no longer available.

For sale, 5.8GHz 10mW RF modules. I only have a couple dozen of these, all are New/Unused. $9.50 USD each, $9 each for three or more pieces. USA delivery is $2.50 shipping per order (First Class Mail, uninsured). International delivery (outside USA) is $8.50 for International First Class mail, no tracking / no insurance.

These are the SK-RF TX5813, as sold by some FPV shops. For example:

The modules are tiny, operate on 3.5-5.0 VDC (1S LiPO), and require just a few low cost parts to make a DiY 5.8GHz A/V Tx for a micro R/C model. The full data sheet can be downloaded from the link posted above.

They have 8 frequencies (configured by grounding three pads) as follows:
5705 5685 5665 5645 5885 5905 5925 5945 MHz

Works great with the popular RC305 5.8GHz receiver sold by many FPV shops. NOT compatible with Airwave, Immersion, or FatShark.

Please PM me if interested. PayPal only, no trades.


As shown on the data sheet, only two capacitors and the antenna are needed to make a complete transmitter with this module. I do NOT provide the caps or antenna connector, but your local electronic supplier should have them. No need to create a circuit board since all the parts can be soldered directly to the module. Below is an example:

Edited by Mr.RC-Cam
SOLD OUT. No longer available.
  • Like 1
Link to post
Share on other sites
  • 2 weeks later...
  • 1 year later...
  • 8 months later...
  • 1 month later...
  • 1 month later...
  • 9 months later...

I still have some. When ready to purchase please use forum PM to contact me for payment details.

General Info: I will post an announcement when they are sold out. So until then, consider this deal ongoing.

  • Like 1
Link to post
Share on other sites
  • 10 months later...
This topic is now closed to further replies.
  • Create New...