baylor 0 Posted November 8, 2011 Report Share Posted November 8, 2011 Looking for an RC servo driver circuit with the following characteristics: 1) 12-14 vdc 2) when +12 vdc is applied servo will turn at a pre-defined speed in the CW direction 3) when volatge is removed servo stops 4) when -12 vdc is applied servo will turn at a pre-defined speed in the CCW direction Any help would be appreciated. Thank you for your time. Quote Link to post Share on other sites
Mr.RC-Cam 129 Posted November 9, 2011 Report Share Posted November 9, 2011 Unless you have the time and skills to create your own custom design I'd suggest you contact an industrial motion control supplier. There are endless products used in the tool automation industry for doing things like you describe. Quote Link to post Share on other sites
Terry 5 Posted November 9, 2011 Report Share Posted November 9, 2011 Or pay a someone on an electronics forum for a couple of hour work. Terry Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.