Jump to content
Sign in to follow this  
mstore

antenna questions

Recommended Posts

hello!

I finally got my patch antenna to work well. I use with my cheap hong kong camera setup. (http://www.cables-world.com/Product/EN/product_detail.asp?productid=592)

I still don´t know weather the tx rf power is 10mW 50 mW or 200mW... the tx takes about 72mah at 5v.... what could be the outputpower?

The range improved from 135m to about 400 m (450ft to 1300)

later I discovered that the tx antenna seems to 1/3 wave 42mm on 2414 mhz.

What Antenna solutions could i use on this camera? A 1/4 wave ground plane antenna didn´t seem to work better than the original...

how importent is it that the distance between the metal sheets on a patch antenna is exactly 5mm for 2,4 ghz?

martin

Share this post


Link to post
Share on other sites
how importent is it that the distance between the metal sheets on a patch antenna is exactly 5mm for 2,4 ghz?

The dielectric distance sets the bandwidth. Follow the recommendations on the project page for good operation.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×